Tips on Buying The Right Table Saw

Your first table saw should be one that fits your needs, but with so many choices available, it can be difficult to choose. Table saws are available in all different blade sizes, motor sizes and they have many different uses. Picking up your first saw should be an enjoyable experience. By following these steps you should be able to get just the right table saw that will fit your needs for all the projects you have in mind!

When you are picking out your first table saw think of these things:

The Table Saw Fence: this is the part of the table saw that slides back and forth. You Table Sawuse this piece when you are feeding lumber to the saw. The type of fence used will affect your overall cost of your table saw. That being said, an expensive fence will be better quality and will be easier to use than one that is cheaper. If you are looking at a professional quality table saw, then don’t be surprised if they have normal or average fences. A saw with an average type fence will be adequate for your needs and you should be able to complete the projects you need to without any difficulties. These types of fences are good if you are new to wood working or you are a do it yourself kind of guy. They will not be the quality that a master wood crafter would use. Don’t be too hard on yourself if you don’t like the quality of fence on your table saw since there are many companies out there that offer exceptional after-market fences.

To Tilt or Not to Tilt?: There are plenty of table saws that offer tilt options. These table saws will move from left or right and help get just the right angle with an exacting cut. Older model table saws usually only offered right side tilting. If you wanted one that tilted both ways then you would have to invest in a professional type model. But thanks to technological advancements, it is easy to find and affordable table saw that will tilt either way. Right tilt table saws offer a better cutting surface and make better cuts. Generally speaking, since they have been on the market longer, most right tilt table saws will offer more accessory options and they are easier to use.

The Mitre Gauge: Any table saw you buy will have a mitre gauge. Usually there will be two holes on each side of the table saw where you will place your mitre gauge. The mitre gauge is where you place the wood to guide it to cut it. Most mitre gauges that come with table saws are average in quality so if you need to upgrade, you can. Mitre gauges can be purchased at any specialty store or any home supply store. When purchasing a new mitre gauge, you should make sure it will fit nicely into your particular table saw. You do not one that will be loose or that will be hard to use. You want a mitre gauge that complements your current table saw and one that will work efficiently with your unit.

More Power: The size of the motor of your table saw will ultimately affect how much work you can do. You do not want something that is less than 1 1/2 horsepower. Usually, professional table saws will have a motor between 3 and 5 horsepower. For most do it yourself projects a 1 1/2 horsepower table saw should meet your needs and it will have enough juice to get the job done. When you are completing a large project, always remember to take your time cutting the wood. The table saw is designed to do the cutting so you don’t want to force it to do it’s job.

Table Saw Blades: The normal size for a table saw blade is 10 inches. There are other sizes available, but they can often cost a lot more because they come with bigger motors. Don’t worry about the size of your blade because you should be more concerned about what the blade is made out of. As with the mitre gauges and the fences, blades will come in different materials and shapes. It would be a good idea to start out with a combination blade since they are very versatile and can be used by just about anyone, in any type of table saw. As you get more proficient with your table saw you can then choose more exacting blades. Always keep your blades free from any debris and always get rid of them when they get too dull.

The Saw Table: Probably the most important part of your rigid table saw is the foundation it sits on. You will want a tabletop that gives you enough working room. This is one area in which you should not compromise on since this will ultimately determine how easy your table saw is to use. Your tabletop should be very flat so you don’t have any issues operating it. This may seem pretty common sense, but a tabletop that is warped or is crooked can make your easy home projects a lot harder to do properly and precisely. Tabletops are important to the overall function of your table saw so it’s a good idea to shop around for the best tabletop your money can buy!

No comments yet

Leave a Reply