Planning A Steel Shelving Project Correctly

Anyone planning to make their garage or storage area more effective with steel shelving should learn the best way to install and shop for the materials they need. The following outlines 10 steps that will help you organize your garage effectively.

1. Pick closed or open storage types. If you choose open steel shelves, you can see where everything is at any time, giving you the ability to just pluck it off a shelf, and closed shelving involves doors for a less cluttered look.

2- Pick stainless steel wire shelving or solid shelves for your area. This decision is Steel Shelvingbased primarily on what kind of items you want to store in your garage. You can save a lot of money with wire shelving, and your items will have enough air. If you have items of small or varying sizes, and wire shelving is too precarious for them, you should get solid shelving. If you area is subject to damp then stainless steel shelving is worth considering as they will resist corrosion.

3- Find out how wide the shelving area is. Take some measurements to discern what space you can put storage units in.

4- Measure how big your potentially stored objects are. Find out how wide, deep and long each object is in order to determine how much storage space you need to store it all.

5- Find out how heavy your objects will be. Weigh each of your objects, multiplying the units you want to store on each shelf by the number of shelves you want to put up. You want to weigh the items evenly along the steel storage shelves, which will determine its weight capacity.

6 – Find out how wide each steel shelving unit is. You’ll find shelving units in widths of 36″ to 48″. If the items you’re storing are all of similar or equal size and weight, like storage boxes, make sure your shelves are just a bit bigger than the width of the objects put together.

7- Measure how deep your shelves need to be. Depths of steel shelves can range from 12″ to 24″. Be sure to factor in how the objects will be stacked on the shelves, as that can affect how much width or depth you need to have for your shelving; be sure to pick the most efficient configuration.

8- Figure out the total weight capacity of each shelf. Step 5 leads into this step; get a shelving unit that can hold up the weight of all the objects that you want to put on it by measuring each shelf.

9- Find out how high your shelves need to be. There are many things that will decide how high your shelves need to be. Look at the height of the ceiling in the area you want to shelve. Once you do that, multiply the number of shelves you need by the minimum height requirements of your objects. Round up in your measurements until you hit a standard steel shelving height, which is typically either 75″, 87″ or 99″.

10- Determine how big and how heavy everything will be. Figure out a total size and weight for all the objects, and find a shelving unit that will match that with an appropriate number of shelves. Once you do all this, you’ll have a better idea how to go about your steel shelving project.

No comments yet

Leave a Reply